At 04:22 PM 8/1/96 EST, you wrote:
> Seems to me, all the snaps I replaced on the body went on with
> stainless sheet-metal screws or small, fine-thread,
> phillips-head bolts. For which I went to the locak hardware
> and got stainless. I know that's what I used for the
> tonneau/top snaps on the rear deck.
>
> Maybe you can regrind the taper on the rivet-tool nipple?
>
> chuck
>
I added a small white teflon washer at the base of the snap so that the
pressure of the snap would not crack the paint.
Don Mathis,Ph.D.
LUCENT TECHNOLOGIES
donmathis@lucent.com
'61 MGA '37 Bentley
|