Tom Wagner writes:
>Can some one tell where on my engine I would find the drain plugs for
flushing the engine of old antifreeze?? I have a 67 B,
The engine block water drain is on the distributor side of the block, down
low, just behind the distributor and below the oil pressure gauge port. The
originals were a petcock type of drain valve, but as many of these valves
have long since expired, you may find a different type of valve or a plain
pipe plug. In any case, when you open this port it is likely that nothing
will come out until you probe around bit with a wire or such to dislodge the
accumulated sediment from the water jacket.
Good luck,
Barney Gaylord -- 1958 MGA
Naperville, Illinois
|