On Wed, 10 Jan 1996, Mark Cook wrote:
> I have a quarter inch gap between the bottom of the door and the door
> sill. The doors needs to be pull in tighter against the door jam. The
> any adjustment that would pull the bottom of the door in tighter against
> the jam or should I look into buying new hinges?
MGB doors are adjustable in several places; the upper and lower
hinges may be moved (independantly) about a half inch to pull the
door farther into the opening. To do this, loosen the 4 large
screws securing each hinge and wiggle the door a bit; if it moves
*great*, if it doesnt, you will need to remove the splash panel
inside the front fender and loosen the large nut securing the hinge.
You might get away with just moving the striker on the B-post to pull
it in farther.
Good luck...
Scott Hower --> howersl@ttown.apci.com
Air Products & Chemicals, Inc.
7201 Hamilton Blvd Trexlertown, PA
(610) 481-2646
|