mgs
[Top] [All Lists]

Re: Meboe is right!

To: mgs@autox.team.net
Subject: Re: Meboe is right!
From: "A. B. Bonds" <ab@vuse.vanderbilt.edu>
Date: 21 Jun 1995 17:25:35 -0500
In <Pine.SUN.3.91.950621160406.23626A-100000@northpole.med.uvm.edu>, W. Ray 
Gibbons wrote:

>Despite being only 25 years old and not knowing a blessed thing about cars
>or the meaning of life, Greg was right about the location of the fixed
>timing mark on an MGB 18GH engine.  
>
>I had driven it to work, so I looked.  There the little thing is, hanging
>like a mechanical uvula behind the crank pulley, dead center on the bottom
>(it looked a lot like a multifaceted oil drop).  What a wonderful place
>for it; you need pretty long arms to adjust the timing.  Now, either the
>car is running with the timing 60 -120 degrees advanced or retarded, which
>seems fairly improbable, or mayhap there's a rubber layer in the pulley
>that has slipped.  Just because I am curious, I'll check the static timing
>as soon as I have time, and see what I get. 

Seems to me you have a late model pulley and earlier timing cover.  As
mentioned, I've seen that before.  The advance on this engine can be
quite dramatic (some 40-50 degrees at higher speeds), but that should
not happen at idle, unless the springs have fallen out of the
distributor.
                        A. B. Bonds


<Prev in Thread] Current Thread [Next in Thread>