mgb-v8
[Top] [All Lists]

Re: [Mgb-v8] How to remove a rheostat from the dash

To: "The Rays" <therays@ellijay.com>, "MG-V8 List"
Subject: Re: [Mgb-v8] How to remove a rheostat from the dash
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Wed, 7 May 2008 10:33:51 -0700
Look at the bottom of the knob. There is a small recess. Push a punch
into the recess and that will lift the retaining pin, while pushing up
on the punch carefully pull the knob off.



Kelvin Dodd



> -----Original Message-----
> From: mgb-v8-bounces+doddk=mossmotors.com@autox.team.net
> [mailto:mgb-v8-bounces+doddk=mossmotors.com@autox.team.net]
> On Behalf Of The Rays
> Sent: Wednesday, May 07, 2008 10:26 AM
> To: MG-V8 List
> Subject: [Mgb-v8] How to remove a rheostat from the dash
>
> Does anyone know how to remove the rheostat from a 1980 MGB
> dash?  I have the dash out of the car and have loosened the
> rheostat at the back of the dash but cant figure out how to
> get the knob off.
>
> Thanks in advance for your help.
>
> Jim Ray
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Mgb-v8 mailing list


Mgb-v8@autox.team.net
http://autox.team.net/mailman/listinfo/mgb-v8

<Prev in Thread] Current Thread [Next in Thread>