When I built my V8, I used the RB column and it's associated turn/wiper
switch (integrated style). That was easy enough but hooking it up to the
early 70's wiring took a bit more time. As Jim states; I had to switch a
couple of wires around in the plastic plugs. The correct wires are there,
just not in exactly the same positon between the early and late harnesses.
In Barrie's case, acquiring the correct early-style (141-810) turn switch
should solve the problem.
Im about to go through something similar to what Barrie did with his car.
I'm putting a RB-style dash in my 69 GT and just getting to sorting out the
wiring harness I had Autosparks in the UK build for me. Fun galore!
Cheers
Simon
----- Original Message -----
From: "Jim Stuart" <jimbb88@comcast.net>
To: "Barrie Robinson" <barrie@look.ca>; "Paul Hunt"
<paul.hunt1@blueyonder.co.uk>; <mgb-v8@autox.team.net>; <mgs@autox.team.net>
Sent: Friday, August 31, 2007 2:58 PM
Subject: RE: [Mgs] Turn Indicator no worky
> Before all this is resolved, you will have to change or modify the dash
> harness as the wiper and turn signal switches will not plug into the '70
> wiring.
>
> As I said, it is a system.
>
> Jim Stuart
///
/// mgb-v8@autox.team.net mailing list
///
|