and so it begins...
part 2 of stated question:
Like many, I used a remote filter kit on the metric pump base that I
installed; I tapped into the line that feeds the filter (out of pump into
filter) on the assumption that this would give the closest reading to true
oil pressure. Is this correct.
Also, what kind of pressures can I expect with this pump bottom and the
pressure spring that came with it. It is the metric pump base that I think
is commonly recomended. If there is a question it would appear from the
receipt that the part number is 12337257, I will verify on Monday if need
be. this is all of interest as I prepare to buy my gauges.
thanks much,
james
>
> > OK James lets ask "the question".
> >
> > Are there any locations on the GM 215 to tap the oil pressure sender
> > into ... other than the stock location on the oil pump?
> >
> > Larry Hoy
> > PS I saw James' car last week, heee's close to driving this. Lookin'
> > good.
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|