Nylatron is very hard. Red poly (not as hard as Nylatron) gave a harsh and
choppy ride when allied with rubber bumper roadster springs on a CB
roadster, but seem OK with CB springs.
My 2p.
PaulH.
----- Original Message -----
From: Barrie Robinson <barrier@bconnex.net>
To: <mgb-v8@autox.team.net>
Sent: Friday, November 26, 1999 7:48 PM
Subject: Suspension rubber whatsists
> Folks,
>
> Can anyone give me an opinion on the difference between rubber,
> polyurethane and nylatron bushings for suspension based on real
experience.
> I have been told that the latter two make riding harsh - but that may be
> in comparison to North American boat-ride vehicles. Nylatron was used by
a
> friend of mine in a Maserati Mexico and the steering is pin-point. and
the
> ride is very similar to a Maserati Mistral so one has to assume the
> nylatron did little to put arshness in the ride. But I would like to hear
> from someone who has had both - preferably in the same car. Nylatron is
so
> sanquinary expensive that I do not want to get it only to find it gives a
> go-kart ride.
> Regards
> Barrie Robinson
> barrier@bconnex.net
>
> PLEASE NOTE CHANGES TO EMAIL AND WEB PAGE ADDRESSES
>
> COBALT TECHNOLOGIES INC
> Email faxlan@cobalt.com
> Web Page http://www.faxlords.com
> Tel 705-726-7993
> Fax 705-726-7994
>
>
|