RE: Almost Ready to Rock & Roll

["Dodd, Kelvin" <doddk@mossmotors.com>]

Rick:

        No worries wearing me out.  I'm keeping your list for future
reference when I fire mine up.


> 2.  I see from the wiring diagram that  the coil / electrical 
> system in a
> 75 B (non catalytic converter) is not  ballasted to reduce 
> the voltage -
> unless that saw tooth looking line is the resistor.  Do I 
> need to install
> something to drop the voltage to keep from burning up the 
> inside of the
> distributor ?

        The saw tooth line is the diagram of a resistor.  Your B uses a
resistive wire built into the harness to drop the voltage to the coil under
running condition.

Kelvin.