mgb-v8
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Clutch recommendations for Rover SD1 engine/transmission

from [Jim Stuart] [Permanent Link][Original]
To: "Christopher G. Moog" <cgmoog@worldnet.att.net>
Subject: Re: Clutch recommendations for Rover SD1 engine/transmission
From: Jim Stuart <jimbb88@erols.com>
Date: Wed, 22 Oct 1997 19:35:34 -0400
Cc: mgb-v8@Autox.Team.Net, "rovernet@ganglion.anes.med.umich.edu" <rovernet@ganglion.anes.med.umich.edu>, "tr8@mercury.lcs.mit.edu" <tr8@mercury.lcs.mit.edu>
References: <344D5D61.B8AC0788@worldnet.att.net>
Reply-to: Jim Stuart <jimbb88@erols.com>
Sender: owner-mgb-v8@Autox.Team.Net 
Chris-

Why not use the stock clutch & pressure plate ? Even though you have
increased horsepower, vehicle weight has decreased compared to the
original Rover. Stock should be enough unless you are a regular at the
drag strip- IMHO

Jim
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Clutch recommendations for Rover SD1 engine/transmission, Christopher G. Moog
Next by Date:  RE: Clutch recommendations for Rover SD1 engine/transmission, Mike Cousins
Previous by Thread:  Clutch recommendations for Rover SD1 engine/transmission, Christopher G. Moog
Next by Thread:  RE: Clutch recommendations for Rover SD1 engine/transmission, Mike Cousins
Indexes:  [Date] [Thread] [Top] [All Lists]