Gerry,
The rubber strip is nailed in place with the rounded portion overlapping the
metal cowl. The flat portion sits snugly on the wood, and you cut out a section
of that in the center, the same length as the chrome outer hood strip support.
Lawrie
> -------Original Message-------
> From: Gable, Gerry <GABLEG@ecu.edu>
> To: mg-t@autox.team.net <mg-t@autox.team.net>
> Subject: [Mg-t] TC Question
> Sent: 05 Sep '16 20:55
>
>
>
> Can anyone tell me if I have to trim the rubber strip (cowl to Hood)
> where the center. strip (center hood) bar is mounted on a TC? Also on
> which sides are the Horn and Fog lights mounted, I have seen them both
> ways.
> Thanks
> Gerry
>
> -------------------------
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/mg-t/lawrie@britcars.com
>
>
______________________________________________
Mg-t@autox.team.net
Archive: http://www.team.net/archive
|