Rick,
I'm guessing this might be after the fact but when I replaced the wire harness
on my TF I snipped off all but about two inches of old wire from each
connection. I used what I left in place as a guide when I installed the new
harness. It's pretty straight forward and as you noted having reference
photos makes routing the various breakouts fairly simple.
Tuck
Sent from my iPad
On Jun 9, 2013, at 10:57 AM, Richard Lindsay <richardolindsay@gmail.com>
wrote:
> Hello Friends,
>
> In all my scrounging around on the Internet, I have not been able to
> find a diagram of the TD's wiring harness layout and connectivity.
> These drawings are common for other British vehicles. I just can't
> find one for THIS car. Let me explain what I'm talking about.
>
> The TD's wiring is quite simple and schematics are in the workshop
> manual. Harnesses are available from Moss, etc., and they are of high
> quality. What is missing is a sketch of the harness routing and the
> breakouts from the harness, indicating which color-code of wires go to
> which lugs of the various components. And yes, one can work this out
> pretty easily given the schematic and snapshots taken before
> disassembly. But I think a simple, easy guide would benefit our
> community. If you have one (Bud?), or know of one, please share the
> reference. Otherwise, I will make one as I plan my car's rewiring,
> and share it with the T-Series community.
>
> -rick.
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/mg-t/tuck.southworth@gmail.com
______________________________________________
Mg-t@autox.team.net
Archive: http://www.team.net/archive
|