I, just Friday had to take two strong boxes from a deceased relative to the
locksmith with no key for either and he created a key for each ... if all
else fails, try a certified locksmith.
Gene
Eliot 53 M.G. TD
Vermont
-----Original Message-----
From: mg-t-bounces@autox.team.net [mailto:mg-t-bounces@autox.team.net] On
Behalf Of Andrew Moyce
Sent: Monday, November 08, 2010 3:56 PM
To: mg-t@autox.team.net
Subject: [Mg-t] Ignition, headlamp switch
I've got a NOS ignition switch to install in my TD, but there is no key
number stamped on the face, and of course my key doesn't fit.
Anyone have any tricks on how to disassemble so I can either change out
the cylinder or take it to a locksmith?
I recall that when I was restoring the original I snapped off the lamp
switch handle trying to get it apart.
Andy Moyce
52 TD
______________________________________________
Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/mg-t/crownwheel@comcast.net
______________________________________________
Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|