Greg,
I suggest you replace the entire line. You can get soft copper tubing
of the right diameter from a local plumbing supply house. Specifically,
it is 5/16" refrigeration tube and is usually sold in 50 foot lengths,
but you may be able to buy it by the foot.
Assuming the correct fittings are on your car, you can reuse those
fittings and solder them on the new copper tubing. Some advantages of
making your own fuel line are that you can fine-tune the length to
exactly match what you need and you will have plenty of extra tubing
(for less money than Moss, too) in case you make a mistake.
Larry
______________________________________________
Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|