mg-t
[Top] [All Lists]

Re: [Mg-t] TD Steering Rack

To: "'Ted Jackson'" <ted@the-jacksons.ca>, <jvk52td@aol.com>
Subject: Re: [Mg-t] TD Steering Rack
From: "Gene Fodor" <crownwheel@surfglobal.net>
Date: Mon, 23 Nov 2009 14:50:49 -0500
I've just gotten in on this thread and do I understand correctly, that the
tach gear box from the generator to the tach should also have 90W and not
grease?
Tks
Gene
Vermont

-----Original Message-----
From: mg-t-bounces@autox.team.net [mailto:mg-t-bounces@autox.team.net] On
Behalf Of Ted Jackson
Sent: Monday, November 23, 2009 10:38 AM
To: jvk52td@aol.com
Cc: mg-t@autox.team.net
Subject: Re: [Mg-t] TD Steering Rack

Hi John,

See http://omgtr.ca/technical/highpressureoiler/highpressureoiler.htm for
how to make a dedicated oiler for the steering rack and the tachometer
gearbox (as Bob Grunau recommends).  Either of the oilers will work better
on the rack with a long flexible nozzle. I use a 90 weight Marine Gear Oil
for both applications.  Cheaper than the synthetics that I use in tranny and
differential.

Ted

On Mon, Nov 23, 2009 at 8:39 AM, John Seim <kingseim@earthlink.net> wrote:

> Purchase 386-025 Ball Joint Puller from Moss Motors USA. Regular price
> $22.95,
> on sale now for $19.95.
> One tie rod end is older than the other one.
>
> 90W gear oil is to be used in the steering rack. Grease doesn't travel
very
> well, and
> is hard to get the grease to flow into the tie rod ball and cup assembly.
>
> John Seim
> Irvine, CA USA
>
>
> On Nov 22, 2009, at 7:34 PM, jvk52td@aol.com wrote:
>
>  Hi "T" Listers,
>>
>> I have been trying to read as much as possible about the steering rack on
>> the
>> TD.    One of my rack seals was ripped.
>> After much work I finally was able to separate the tie rod end by
pressing
>> it
>> out with a puller. What is the easiest way to do that task ??
>>
>> I noticed my tie rod boot was ripped on the other side so I am just going
>> to
>> replace both tie rod boots and both rack seals.
>>
>> My tie rod ends are different from each other with one being flat on the
>> bottom with no grease zerk on top /  the other kind of round on the
bottom
>> with a grease zerk on top.
>>
>> On the middle of the steering rack is a zerk which I have read about both
>> grease and oil for this area ????
>>
>> Thanks,
>>
>> John
>> _______________________________________________
>>
>> Support Team.Net  http://www.team.net/donate.html
>>
>> Mg-t@autox.team.net
>> http://autox.team.net/mailman/listinfo/mg-t
>>
>> Archives at http://www.team.net/archive
>>
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
>



-- 
Ted Jackson
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>