I have a '53 and don't know what you mean by blade stop plate. Also, is your
windscreen wet when you try the wipers? Mine will do the same as yours when
the screen is dry.
Cheers
Larry
----- Original Message -----
From: <hstrachman@yahoo.com>
To: "MG" <Mg-t@autox.team.net>
Sent: Tuesday, April 28, 2009 10:31 PM
Subject: [Mg-t] lights and wiper questions
> Greetings
> I have two problems with my late 53 TD.
> One, the wipers --when I turn them on, they will make one sweep and then
> bind
> up. The motor was built by a respected builder in New England. All parts
> are
> moving freely but it just stops. Also, can you tell me what the blade stop
> plate does? I'm missing mine.
>
> Two, the lights--with key off, light switch in first position, front and
> rear
> lights are bright -- when key switch is turned to power all 4 lights dim.
> Plus
> no brake lights. I replaced brake light switch, recently, and brakes
> lights worked after replacement.
>
> Thanks
>
> Herb
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t
Archives at http://www.team.net/archive
|