Re: [Mg-t] Brake pipe flare angles on TC/TA

["Lew Palmer" <lpalmer@roundaboutmanor.com>]

Terry,

BSP fittings have a 30 degree seat angle. If you find a flaring tool for 30
degrees, let me know.

Cheers,
Lew Palmer

-----Original Message-----
From: mg-t-bounces@autox.team.net [mailto:mg-t-bounces@autox.team.net] On
Behalf Of TATERRY@aol.com
Sent: Monday, December 01, 2008 3:41 PM
To: mg-tabc@yahoogroups.com; mg-t@autox.team.net
Subject: [Mg-t] Brake pipe flare angles on TC/TA

Listers, does anyone know what the proper angle of the flares are?  I
believe 
there are two standards, 45 degree and 37.5 degrees......
I'm having a devil of a time getting some new brake pipes to seal...one one 
end is a TA fitting on the other is a TC.....
Thanks
Terry<BR><BR><BR>**************<BR>Life should be easier. So should your
homepage. Try the 
NEW AOL.com. (http://www.aol.com/?optin=new-dp&amp;icid=aolcom40vanity&amp;
ncid=emlcntaolcom00000002)</HTML>
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive