BILL SNYDERS Brake Lights

["krislynco.llc" <krislynco.llc@adelphia.net>]

Bill
Remove the two wires from the switch and see if the lights go off.........if
they do the switch is bad...or stuck... replace it...I once (after a complete
rebuild) had a wire pinched that was causing a ground situation which made the
lights stay on always...found it....taped it and voila' fixed...

hope this helped.

rocky

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t