Ground lug attaches to the bolts holding the fender to side panel.
Closest one forward, as that will also help in support.
I just completed doing a TF wiring harness. I have the 2 wire sockets
for the three jeweled lamps. Just located a supplier for the clips that
hold the wires for the courtesy lamps to the dash.
Also, found out that the 17mm x 925mm fan belt supplied for a long time
by Moss Motors is best for TF's. The extra large Goodyear belt places
the generator too close to the wires on the left side panel.
John Seim
Irvine, CA
TATERRY@aol.com wrote:
>Fellow TF'ers.....I'm wiring the TF1500....finally figured out how the loom
>fits and what goes through which grommet. Now the looms that lead on both
>sides out to the headlights and side lights both have a grounding lug that I
>presume connects to the body or frame in the area where it will pass through
>the
>bonnets sides on its way to the lights. Can someone tell me where the ground
>wires connect?
>Tnx
>Terry in Oakland
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|