Douglas,
My TD is wired as the workshop manual shows, A1 & A2 at the top. Its
wiring is as it was built.
Bob
On Mon, 19 Sep 2005 14:19:35 +1200 "Douglas Ormrod"
<Douglas.Ormrod@neurological.org.nz> writes:
> Hi T people
>
> I'm onto the wiring now on the 53 TD - beautifully made new wiring
> harness from In Point in Australia which is going if very nicely. I
> have
> a question re the fuseblock.
>
> On page N15 of the official workshop manual the fuse block is shown
> with
> terminals A1 and A2 at the top - i.e. the central second A4 terminal
> is
> at the bottom. In Horst Schach's book on page 132 the A1 and A2
> terminals are at the bottom - central A4 at the top.
>
> With A1 and A2 at the top the wires are the wrong lengths I guess
> the
> electrons don't mind which way they flow through the fuse and by
> swapping the wires on A1 and A2 it all fits - but I was wondering
> which
> is the correct orientation.
>
> Thanks
>
> Douglas
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|