Re: Different Fenders for Armstrong vs Girling Shocks?

[Dave & Liz DuBois <ddubois@sinclair.net>]

Bill,

Dallas is correct, there is a hump required on the front fenders 
required to accomodate the Armstrong shocks, but you might want to check 
your fenders as compared to those on earliers TDs as they may already 
have the hump in place since it was sometime in 53 that the TD went to 
the Armstrong shocks.  You will also need shorter bolts for the back 
mounting holes in the Armstrong shocke than on the Girlings.

Good luck,
dave

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t