Re: MG TD Wheel Studs

[Bullwinkle <yd3@nvc.net>]

Brian:

Addendum to John's message:

A good way to check to see if the studs are SAE or BSF, is to try a SAE
nut on the other studs.  If you can't get the SAE nut to fit by hand, no
wrench needed, on the remaining studs, then the drum's studs are BSF.

Blake

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t