Robert Grunau wrote:
> I believe the TD has a 7/8" bore same as MGA 1600. Healey Bugeye Spriten had
> a 3/4" bore in same twin MGA type cylinder.
> I know, the "expert" said TD was 1" bore but he was wrong .
> Regardes, Bob Grunau, 52 TD with no mods except 1500 XPEG and 4.3 diff
> gears.Original brakes work fine.
>
>
> Does anyone know what the bore of the master cylinder is for a TD? How
> about an MGA 1600?
>
> I'm converting to MGA 1600 front disc brakes and should match the bore
> of the MGA for best performance.
>
> Also did Lockheed make the same cylinder that the TD has with smaller
> bores and what was the application of one that matches the bore of the
> A1600? Even if I can't find a cylinder like that, at least I could get
> a rebuild kit in the proper size and have the stock cyl. sleeved down to
> that size.
>
> Thanks,
> Charlie Baldwin
> '52 TD with some mods
>
Bob,
You are correct. I removed the master cylinder from the TD tonight and it is a
7/8"
bore. Thanks for responding.
Charlie
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|