Blake,
I have BAP (British Auto Parts) 1956 that has several pages of tables.
Here are some from one page:
Engine R&R 12.0
Comp Ovhl,rng,valv,brg 13.0
GrdValves,tune,test 9.0
Pist,rings,hone 11.0
Rod Brgs, R&R 3.5
Tune, except tappets 1.5 ?3.5 for TF
Adj tappets .5
Install short block 13,8
Engine & gearbox R&R 12.0
Cyl Head R&R 2.0
Carbs R&R 1.4
Most services were longer for TF and shorter for Magnette. Some, though,
are not as one would expect. Tune (see above) Gearbox recondition TD=6.5,
TF=4.5. Same gearbox, so why would this be?
Bob
On Tue, 06 Nov 2001 10:31:32 -0600 bullwinkle <yd3@nvc.net> writes:
> Greetings:
>
> Does anyone out there have a flat rate time sheet or booklet that
> gives the flat rate time for working on the MG TD?
>
> I have one for the MGA twin cam and also a book on imported cars
> which covers the MGB, but was wondering if any time charts exist
> for the TC/TD/TF. I would think that the TD/TF would be
> identical. These charts give the normal time expected to take
> for doing tuneups, brake repairs, engine removals, etc.
>
> Blake
///
/// mg-t@autox.team.net mailing list
///
|