Re: Wipers leak Now Header rail leak

[Bullwinkle <yd3@nvc.net>]

I put a strip of closed cell foam rubber across the header.  The
type I used had a glue backing.  As that has somewhat deteriated,
I am now going to take the plunge and remove the top and bow
cover from the header rail.  The foam will be placed directly on
the header rail, with the bow cover and top then installed.  I
will also seal the bow cover and top seams with Household "Goop."

Blake

///
///  mg-t@autox.team.net mailing list
///