mg-t
[Top] [All Lists]

Broken half-shaft

To: mg-t@autox.team.net
Subject: Broken half-shaft
From: streepey <streepey@jps.net>
Date: Wed, 11 Oct 2000 14:27:16 -0700
Another tool for extracting a broken half-shaft when the break is in the
differential is as follows:

Get a 3 foot 1/4 inch dia steel rod.  Grind about 10 inches of it down to a
1/8 inch square rod.  Make a small bend an inch from the end.  Pull the
half shaft from the other side and insert the tool.  Give it a whack with a
hammer and the broken 2 inch piece will come out like a bullet.

I know it works 'cause I've done it.  I carry a spare half shaft with a
bearing pressd on in my spares kit.

Lee



<Prev in Thread] Current Thread [Next in Thread>
  • Broken half-shaft, streepey <=