Bill,
I'll hazard a guess that the choke inner cable has worn a little groove
in the outer cable, such that when it's pulled with a load on it, it
jams. If that is correct, then turning the outer cable 1/4 turn in the
dash and along its length should ease the friction.
Bob
On Sun, 20 Aug 2000 17:28:54 -0500 Bill Loubiere <loubiere@earthlink.net>
writes:
> I am having trouble getting the choke cable to work properly on my
> MGTD. If
> you disconnect the cable from the choke is moves very easily. The
> choke
> mechanism moves with only spring resistance.
>
> If I disconnect the return springs, I can move the choke with some
> effort.
> I can not move it with one of the two return springs connected.
>
> Does anyone have any ideas on how to fix this.
>
> Any help will be appreciated.
>
> Bill
> 1953 MGTD
>
|