Hi Steve, I made my own. All you need is a spare master cylinder cap which
you need to drill to take a hose connector. Screw it into master cylinder,
attach a rubber tube to it and connect the other end to your compressor or
spare tyre and pressurize with an air supply of around 15-25psi, no more. It
works well, just make sure you keep the master cylinder full of fluid whilst
bleeding.
Good Luck
David Tinker
----- Original Message -----
From: "Steve Tritle" <stritle@epix.net>
To: <mg-t@autox.team.net>
Sent: Wednesday, June 21, 2000 6:48 PM
Subject: EEzibleed brake kit.
> I understand the kit will not work with a TD.Hhow do you TD owners bleed
> brakes?
>
> steve
> 52 TD
>
>
|