Mark, I also have a set of pistons for sale, but they are for a TA MPJG
engine, standard 2.5"bore. These are used but of new quality. Minus
rings, of course. The first $50.00 plus postage from Virginia takes them
away.
Dennis Nelson
dnelson@illuminet.net
At 03:43 PM 7/14/99 -0600, Mark J Bradakis wrote:
>
>So I've dug up a couple sets of MG pistons. I'm a Triumph guy, it seems
>unlikely I'll use these TD/TF pistons.
>
>AE Heoplite aluminum pistons, 4 ring style, with an oil control ring below
>the wrist pin. The AE number is RS-14136. Penciled on the side of the box
>is TD/TF, I'm not familiar enough with MG stuff to positively identify these.
>One set is 2.6181 inches, plus 30 over. The other set is identical, except
>40 over. If you need me to measure any of the dimensions, let me know.
>
>I'm asking $100 per set of 4, plus postage from Salt Lake City.
>$175 if you take both sets, save a few bucks!
>
>mjb.
>
>
|