This is a multi-part message in MIME format.
--------------AC4B4961A8BB8DF93C5C9706
Thanks for all the informed suggestions. I have just ordered a unit for
my TD. hope it works as well as some have suggested.
Steve
52 TD
--------------AC4B4961A8BB8DF93C5C9706
Content-Disposition: inline
Received: from imo21.mx.aol.com (imo21.mx.aol.com [198.81.17.65])
by berry.epix.net (8.9.1a/8.9.1a/1998081801/Philippe Levan) with ESMTP
id LAA19277
for <stritle@epix.net>; Wed, 19 May 1999 11:50:52 -0400 (EDT)
Received: from TATERRY@aol.com (14381)
by imo21.mx.aol.com (IMOv20) id pAOa002571;
Wed, 19 May 1999 11:48:47 -0400 (EDT)
From: TATERRY@aol.com
Message-ID: <6fcc5c39.2474375f@aol.com>
Date: Wed, 19 May 1999 11:48:47 EDT
Subject: Re: Petronix ignition
To: stritle@epix.net, mgs@autox.team.net, mg-t@autox.team.net
MIME-Version: 1.0
X-Mailer: AOL 4.0 for Windows 95 sub 13
In a message dated 5/19/99 6:43:21 AM Pacific Daylight Time, stritle@epix.net
writes:
<< Has anyone tried the Petronix ignition in their TD? If so, what is the
prognosis? >>
Steve, I've been running a Petronix in my 1275 powered TA for several years,
it works great. I have equiped an xpag dizzy with one for use in my Arnolt
have not installed it as yet. The dizzy plate must be modified to make the
unit work. I have a write up on this somewhere....Mike Goodman in LA has
made plates specially for this purpose. The Petronix is for negative ground
only but I have heard that they are coming out with a positive ground version.
Bottom line is I think they are great!!
Terry
--------------AC4B4961A8BB8DF93C5C9706--
|