Re: MMM - Vertical Drive Oil Gallery

["Peter Green" <p.green@mgk3.co.uk>]

Dennis,

The 'vertical drive oil seal conversion housing' is a direct replacement for 
the original 'felt seal and felt seal retainer' which sits in the 'vertical 
drive oil drain gallery'. The second oils seal fits into the base of the 
'vertical drive oil drain gallery', the base of the gallery has to be 
machined to take this lip seal. This seal replaces the oil scroll on 
vertical drive fork.

I hope this explains what you want to know.

Peter Green.


----- Original Message ----- 
From: <DENKLEMM@aol.com>
To: <mg-mmm@autox.team.net>
Sent: Wednesday, July 13, 2005 8:16 PM
Subject: MMM - Vertical Drive Oil Gallery


> Hi All
> In the Moss Europe (Barry Walker) catalog page 25 shows part number 504
> (Vertical drive oil seal conversion housing) and part number 505 (Special
> neoprene seal for vertical drive housing). In the picture (page 24) there 
> is a  note
> "Note the removal of oil scroll when 2nd oil seal if fitted in the base of
> the verticle drive oil gallery".
>
> If part #505 is the 2nd oil seal, where is the 1st? What is the 1st made 
> of?
> Why remove the oil scroll?
>
> The service parts list refers to a felt seal and a felt seal  retainer.
>
> As you can see, I am totally confused in this area. Comments please.
>
> Thanks
> Dennis
> PA1518
> PA1829
>
> ///  unsubscribe/change address requests to majordomo@autox.team.net  or 
> try
> ///  http://www.team.net/cgi-bin/majorcool
> ///  http://www.team.net/mailman/listinfo
> ///  Archives at http://www.team.net/archive/mg-mmm
> ///  Send list postings to mg-mmm@autox.team.net
///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net