Re: hand crank

["Peter Green" <p.green@mgk3.co.uk>]

Sarah,

Yes it is a Triple-M one. I have three and their measurements are:-

Length overall 26"
Length from tip to outside of first bend 21-1/2"
Outside to outside length of offset 1@ 7-1/4", 2@ 7"
Sleeve on handle 3-1/2"

The only measurement you do not state is the diameter, all mine are 3/4" 
except for the last 1" (where it engages into the engine) which is 5/8" 
diameter.

Regards,

Peter Green.



----- Original Message ----- 
From: "S. P. Carr" <scvc70@epix.net>
To: "Listserve Triple-M" <mg-mmm@autox.team.net>
Sent: Wednesday, January 05, 2005 10:32 PM
Subject: hand crank


> Listers,
>
> While cleaning out a storage shed we found several hand cranks.  One of 
> them
> is too short to be a T-series, and we thought it might be for a MMM car.
> Measurements are:
>
> length over all      25-3/8"
> length from tip to outside of first bend     21-1/4"
> outside-to-outside length of offset     7-1/4"
> brass sleeve on handle     3-1/2", with groove around middle
>
> I can't try it out on the PA as the car is in bits.
>
> Many thanks!
> Sarah Carr (PA0935)
>
> ///  unsubscribe/change address requests to majordomo@autox.team.net  or 
> try
> ///  http://www.team.net/cgi-bin/majorcool
> ///  http://www.team.net/mailman/listinfo
> ///  Archives at http://www.team.net/archive/mg-mmm
> ///  Send list postings to mg-mmm@autox.team.net
///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net