mg-mmm
[Top] [All Lists]

Re: Crown wheel & Pinion : 7/37

To: "MG MMM" <mg-mmm@autox.team.net>
Subject: Re: Crown wheel & Pinion : 7/37
From: <hiro@octagongarage.com>
Date: Wed, 02 Apr 2003 10:18:31 +0900
Reply-to: <hiro@octagongarage.com>
Sender: owner-mg-mmm@autox.team.net
Bob,

7:37 should come from TA I think. This CWP was (is?) widely available, I
 still have 2 sets in my s/h stock. The ratio 5.285 is 1.7% higher than 
original 8:43(5.375) CWP. Almost same.

Hiro


"J.E.A.Rich"  wrote:
---------------------------------------------------

>I have been working on a friend's PA M.G. It has been fitted with a 
7/37 CWP which is not the original ratio and I'm interested in learning 
from whence it came. There are no obvious markings on the differential.
>
>Please advise if you have any thoughts, thanks.
>
>Cheers, "Bob".

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/cgi-bin/majorcool
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-mmm
///  Send list postings to mg-mmm@autox.team.net


<Prev in Thread] Current Thread [Next in Thread>