How much boost as that will decribe what the charge air temp is and how much
fuel you need to get it cold enough to be ok. I was always under the
impression the port nozzles were for triming cylinders rather than supplying
the majority of fuel. If it was me I would be thinking 75 to 80% on top and
trim with the port nozzles.
Dave
----- Original Message -----
From: <saltrat@pahrump.com>
To: <land-speed@autox.team.net>
Sent: Saturday, July 23, 2011 5:10 PM
Subject: [Land-speed] Cooling an 8-71
>I have been having trouble keeping the teflon seals in my 8-71.
> The teflon melts and chunks out of the rotors after about 3 runs
> at the salt at 18% overdrive on a 430 inch engine.
> The guys at the blower shop say it to be cooler but won't say
> how much gas needs to go through the blower. Right now I have
> 15% going through the blower and 85% through the port nozzles.
> My inclination is to go to 25/75 or 30/60.....maybe the latter
> just to be safe.
>
> Someone know what is best? Or have an opinion....
>
> Thank you,
> Skip
> _______________________________________________
> Land-speed@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/land-speed/dahlgren536@comcast.net
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|