John.
The trans and clutch seem to be OK, I think there is just no way to
keep the dust out and the lube in without a seal on the bearing.
Jim
----- Original Message -----
From: "John Burk" <joyseydevil@comcast.net>
To: "LandSpeed List" <Land-speed@autox.team.net>
Sent: Thursday, January 27, 2011 8:54 PM
Subject: Re: [Land-speed] pilot bearing -
> Jim
>
> I'd vote for an oilite bushing . Could the clutch disc be out of balance
> or one side of the pressure plate be engaging first . Is the pilot bearing
> to shaft fit ok ? Have you checked the input shaft for run out .
>
> John Burk
/land-speed/jdincau@qnet.com
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|