Bronze bar SAE 841 (Oilite)
Here's some sources: (Prices and minimums may vary a lot. I'd start with
the guys who are up front with prices; Reidsupply or Baumhydraulics)
http://sequoia-brass-copper.com/index.html
http://sequoia-brass-copper.com/bronze841-solid.htm
http://www.reidsupply.com/GrpResults.aspx?pid=10022966&aitm=BNT-1024&apid=10022966&bi=
http://www.atlasbronze.com/sintered_bronze_product_sheet.html
http://www.baumhydraulics.com/home.php?cat=359
http://www.westernstatesmetals.com/edited/WSMlinecard.pdf
McMaster-Carr is a great source for oddball hardware; but they only sell 841
plate. Much easier to machine from a bar. (and cheaper for onesy-twosies)
Read the Wikipedia article on Oilite for machining tips.
http://en.wikipedia.org/wiki/Oilite
also
http://www.nskamericas.com/cps/rde/xbcr/na_es/CNSK_Oilite.pdf
Ed Weldon
----- Original Message -----
From: "Jet Fuel" <jet@pistonsandrods.com>
To: "LandSpeed List" <Land-speed@autox.team.net>; "John Burk"
<joyseydevil@comcast.net>
Sent: Tuesday, November 23, 2010 8:17 AM
Subject: Re: [Land-speed] Pilot Bushing
> http://www.mcmaster.com/#sleeve-bearings/=9uf478
> Click 'Sleeve Bearings'.
> Under 'Material', click 'Bronze'.
> Under 'Bronze Type', click 'SAE 841 Bronze'
> -Glen (SCTA 966B)
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|