land-speed
[Top] [All Lists]

[Land-speed] Chassis Dyno Operations

To: LSR <land-speed@autox.team.net>
Subject: [Land-speed] Chassis Dyno Operations
From: drmayf <drmayf@mayfco.com>
Date: Sat, 12 Jun 2010 07:46:00 -0700
More fun dumb questions from me.  Why do we use high gear during a 
chassis dyno pull?  The dyno does not know what gear the car is in, does 
it?  Is there a general limit on the acceleration rate of the rollers?  
If high gear (1:1 in the gear box) is better than a lower gear, then 
would overdrive be better that the 1:1 gear?  Is there some final drive 
ratio that is best? Or is top speed the consideration?   And why does 
shifting during the pull matter?   Are there other considerations in how 
the pull is accomplished? Isn't the desire to get tuning data for the 
enitre rpm range? Or should it be for reliability at peak rpm?

anyhoo, just fun stuff before breakfast...

comments? thoughts? flames?

mayf
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>