land-speed
[Top] [All Lists]

Re: [Land-speed] King Pin Bearings

To: "LandSpeed List" <Land-speed@autox.team.net>
Subject: Re: [Land-speed] King Pin Bearings
From: "John Burk" <joyseydevil@comcast.net>
Date: Fri, 26 Feb 2010 22:15:31 -0500
Skip
You could ream the spindle bores for the next size rollers above the bushing 
wall thickness . Brinelling could be a problem and you'd need a way to 
retain the lower rollers . Is your scrub radius small . If not , correcting 
it would reduce the friction of standard bushings .
John



> List,
> I have been looking for a better bearing system for the king pins on the 
> liner. I want to use tapered rollers instead of bushings but I can't find 
> what I want. I want to do this to firm up the inline front end and make 
> alignment more accurate.
>
> Is there a kit to replace bushings with tapered rollers? The front end is 
> early Chevy pickup.
>
> Any ideas?
>
> Thanks,
> Skip
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as joyseydevil@comcast.net
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>