land-speed
[Top] [All Lists]

[Land-speed] Water jet cutter

To: "LandSpeed List" <Land-speed@autox.team.net>
Subject: [Land-speed] Water jet cutter
From: "John Burk" <joyseydevil@comcast.net>
Date: Mon, 15 Feb 2010 21:04:56 -0500
Stopped in to see my friend Bob today . He showed me some things he's made
recently with his water jet cutter . It makes ready to tap holes in 1/2"
aluminum and cuts hard material up to rockwell 64C . . It has 2 hydraulically
driven pistons that step way down in diameter to pump the water . The water
passes through a tiny hole in a ruby jet at supersonic speed into a chamber
filled with abrasive and out another hole to do the cutting . The work piece
is slightly under the surface of a water tank with 3 ft of water below to
decelerate the abrasive . He keeps asking what  he can make for my streamliner
with it . I wouldn't be surprised if it could make a  crankshaft ready to
grind .
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>
  • [Land-speed] Water jet cutter, John Burk <=