I saw pictures of a small assembly line oven that used 3 shallow boxes.
Each one
was two parts. A fuel - air mixer and a flat burner. The mixer fed a
chamber,
about 1' X 3' X6" that had a fine screen on the inside. The flame appeared
thin, less than 1" - maybe 1/4"?? Since the entire top and walls of the
oven
were fire, it didn't require time to heat up. I have no idea what the
temps were.
Remember the three most important parameters when building a Streamliner,
frontal area, frontal area, a tail tapered 7 degrees or less. This
requires a
burner/boiler that will fit in a 36" X 36" X 36'(or less) cylinder, in
my opinion.
I've got lots of spare opinions if someone needs one,
Bryan
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|