Mayf, I think you would want to know class for aero considerations. Also
total race ready weight and if possible front to rear percent.
I can give you 3. MS......GT.....S
Big Ditch Doug
Sent: Monday, June 15, 2009 9:25 AM
Subject: [Land-speed] Caster etc..
> Well, here I go again. Same subject a different tangent, though. If I
> had data, lots of data, then I would try and do something with it in the
> form of a rule of thumb set of numbers. Might give a good starting place
> for some one wanting to build a new or modify an older car.
>
> If I had:
> 1) Wheel base
> 2) Front Track Eidth
> 3) Rear Track Width
> 4) Caster
> 5) Camber
> 6) Toe
> 7) Steering Angle Inclinaion
> 8) Nominal Vehicle Weight
> 9) Scrub Radius
> 10) Front Tire Type (ie real rubber tire or machined from aluminum or ?)
> 11) Top speed attained at any time with the above set up
> 12) Vehicle Weight
> 13) Comments about the handling qualities at speed.
>
> I would *NOT* need to know the car, the driver, the class, or any other
> personal data associated with the car. What I would like to do is build a
> data base of factors so that I can search to see if there are any common
> denominators. I might put the information into parametric form of
> something say like wheelbase / average track width or maybe a lot of other
> combinations. But mainly just to summarize the data into some meaningful
> information. But I would need lots of real data input. If anybody is
> game, shoot the info to me what ever you have. I'll make an excel file and
> work from that...or you can tell me to blow it out my..... well, you know
> where, lol..
>
> mayf
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as dlodom@charter.net
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|