land-speed
[Top] [All Lists]

Re: [Land-speed] Spins and Things...

To: Skip Higginbotham <saltrat@pahrump.com>
Subject: Re: [Land-speed] Spins and Things...
From: NT788@comcast.net
Date: Sun, 14 Jun 2009 17:33:54 +0000 (UTC)
Skip

It was a 200mph run,B  it did not pull, the treadB offset was about 2".The
contact patch is what counts not the contraption supporting the wheel. An
extreme offset tread bias, would eventually pull, kinda like caster/scrub does
when turned.Its the diagonal loading.Again neg. caster might work against spin
propensity(more in a rectangular tread layput).

Jack




----- Original Message -----
From: "Skip Higginbotham" <saltrat@pahrump.com>
To: NT788@comcast.net
Cc: "land-speed" <land-speed@autox.team.net>, "Kirkwood"
<saltfever@comcast.net>
Sent: Sunday, June 14, 2009 9:48:41 AM GMT -08:00 US/Canada Pacific
Subject: Re: [Land-speed] Spins and Things...

Jack,
Did 788 pull, at all, towards or away from the "loaded" side? B I have
found that mine pulls a little away from the side with the most
weight on the spindle.....as it should. So weight control or loading
is very important.......never had this problem with
airplanes......just vertical stabilizer angle of attack/incidence.........(-:
Skip




At 09:01 AM 6/14/2009, NT788@comcast.net wrote:

>Skip, I know how you feel it's a hard old habit! On your inline
>liner It certainly won't diagonalize. Once I drove 788 with only one
>(spindle supported) wheel on the ground, it steered fine. 3deg
>caster, 1' scrub, aprox.
>
>Jack
>
>
>
>
>----- Original Message -----
>From: "Skip Higginbotham" <saltrat@pahrump.com>
>To: "Kirkwood" <saltfever@comcast.net>, "land-speed"
><land-speed@autox.team.net>
>Sent: Sunday, June 14, 2009 6:53:20 AM GMT -08:00 US/Canada Pacific
>Subject: Re: [Land-speed] Spins and Things...
>
>I found it on Landracing.com...clicked on the "forum" icon then
>"search" for "scrub". Good info there. Still only one recommendation
>and that is for "0" scrub. Left to my own devices I would put a
>little (maybe 1/4") positive. That, along with some caster (I can't
>help it Jack), should keep any slack out of the system and prevent
>wandering. Still would like some more numbers. Thank you Jack for yours.
>
>Skip
>
>
>
>
>
>At 10:58 PM 6/13/2009, Kirkwood wrote:
> >Well thanks, Skip. . . B I can't find it :-) B  B  Is it an old thread or
new
> >one? On which forum? B I searched the Landracing forum but there is no
> >'*current* thread. H e l p . . .
> >
> >
> >
> >---- Original Message -----
> >
> >OK, I found it. Thanks. B  B  B  B  Skip
>_______________________________________________
>Support Team.Net B http://www.team.net/donate.html
>
>Land-speed mailing list
>
>You are subscribed as nt788@comcast.net
>
>http://autox.team.net/mailman/listinfo/land-speed
Land-speed mailing list

You are subscribed as nt788@comcast.net

http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>