Thanks guys:
Take a small block ford Lakewood scattershield and drill it.
I can always count on an answer from the list!
Greg
On 4/4/09 12:30 AM, "John Burk" <joyseydevil@comcast.net> wrote:
> Greg
> Redrill a Lakewood bellhousing to your pattern or make a flathead to
> Lakewood adapter from flat plate .
>
>
>
>> Wondering if anyone is still making a scattershield which will mate a late
>> Ford flathead motor to a modern transmission.
>> Lakewood9s website doesn9t list one. Can some other shield be modified?
>> Yes, I can weld 1/42 steel, but I9m trying to make life a little
>> easier.....
>> If anybody has a spare....... It will need to pass inspection for a salt
>> racer
>> Greg
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Land-speed mailing list
>>
>> You are subscribed as joyseydevil@comcast.net
>>
>> http://autox.team.net/mailman/listinfo/land-speed
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as advo@comcast.net
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|