I was thinking 300 lb/hr for my setup
"The injectors operate linearly with pulse width as small as 1.5
milliseconds"
The way I understand this is that they will pulse under 1.5ms but not
linearly....
Am I wrong in that assumption ?
Rick
-----Original Message-----
From: Dave Dahlgren [mailto:ddahlgren@snet.net]
Sent: Friday, January 09, 2009 1:32 PM
To: Rick Yacoucci; 'LAND SPEED LIST'
Subject: Re: [Land-speed] Racing fuel injector
Give some thought to a minimum pulse of 1.5 ms and a 600 lb/hr injector...
Dave
----- Original Message -----
From: "Rick Yacoucci" <Rick@Turborick.com>
To: "'LAND SPEED LIST'" <land-speed@autox.team.net>
Sent: Friday, January 09, 2009 10:09 AM
Subject: [Land-speed] Racing fuel injector
> Hi anybody have any experience with the Moran adjustable injector?
>
> Here is what there web page says
> EFI guru Mike Moran makes it easy for EFI engines to produce 1,000 to
> 4,000
> HP with either gasoline or methanol, with the new M.R.E. PowerTip 5 fuel
> injector. Machined from a proprietary material, coated with titanium
> nitride, these PowerTip injectors flow from 150 lb/hr up to 600 lb/hr. The
> PowerTip 5 was designed as the first purpose built racing fuel injector.
> The
> injectors operate linearly with pulse width as small as 1.5 milliseconds
> and
> opens with the standard 4/1 amp peak & hold ECU drivers. Plus the M.R.E.
> PowerTip injector is a direct replacement for all standard injectors and
> are
> compatible with all aftermarket E.F.I systems out of the box, no injector
> driver adapters needed.
> Order yours today, Starting at $236 each.
>
http://www.moranmotorsports.com/products/catalog/product_info.php?cPath=63&p
> roducts_id=103
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|