land-speed
[Top] [All Lists]

[Land-speed] Fw: piston rings

To: "landspeed@autox.team.net" <land-speed@autox.team.net>
Subject: [Land-speed] Fw: piston rings
From: "Doug Odom" <dlodom@charter.net>
Date: Wed, 15 Oct 2008 14:03:59 -0700
I have already looked at Childs & Albert, Perfect Circle, Grant, Total Seal. 
I was hoping someone had another  source.      Doug
----- Original Message ----- 
From: "Doug Odom" <dlodom@charter.net>
To: "landspeed@autox.team.net" <land-speed@autox.team.net>
Sent: Wednesday, October 15, 2008 9:44 AM
Subject: [Land-speed] piston rings


> List, I need to find some rings for a 4 cylinder race motor. The bore is
> 63.5mm or 2.5"
> Top grove in piston is .037== old ring was .0355
> Second grove in piston is .039== old ring was .038
> Oil grove in piston is .080== ring was .081
>
> I can machine larger groves in the piston if that is the only rings I can
> get.
> Thanks, Doug Odom in big ditch
>
> ps. This motor started life as a Kawasaki industrial motor and was sleeved
> down to run in a TQ Midget.
> That was 20 years ago and the ring supplier is not around anymore.
> _______________________________________________
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

Land-speed mailing list


http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>
  • [Land-speed] Fw: piston rings, Doug Odom <=