Dick, There are at least 3 different TO bearings used with the chevy that I
know of. The 3 finger Borg and Beck, the diaphragm and the raised diaphragm.
Also you must use the correct lever arm for the TO bearing you are using or
the linkage will be messed up. The 3 fingered B&B type uses the flat surface
one. Doug Odom in big ditch
----- Original Message -----
From: "Dick J" <lsr_man@yahoo.com>
To: "lsr list autox" <land-speed@autox.team.net>
Sent: Friday, August 29, 2008 6:57 PM
Subject: [Land-speed] Clutch Throw Out Bearing
> How do you tell a throw out bearing for a three-finger pressure plate vs.
> a
> diaphragm plate? Or are they inter-changeable? In my street rod project,
> built with left-over parts, I am using a three finger 10" clutch with a
> Borg
> Warner T-4 transmission. As far as I know, the T-4s only came with
> diaphragm
> clutches.
>
> DickJ
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as dlodom@charter.net
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|