I have been having problems with oil aeration which causes a drop in oil
pressure in toward the end of a run, especially since replacing my dry sump
pump. When we were doing the dyno work this in April, John suggested that I
was pulling too much air into the crankcase. I had a breather on each valve
cover. We taped off on valve cover and picked up about 10 psi at the upper
rpm, which verified his suggestion.
A few years ago, I was discussing crankcase breathing with my previous
engine guru and he said since it was good to have a vacuum in the crankcase,
the conventional wisdom was to use a closed system with a pressure relief.
Does anyone know where I can buy a closed breather with a built in pressure
relief. So far I have been unable to locate one on the net.
Tom
[demime 1.01d removed an attachment of type image/jpeg which had a name of
faint_grain.jpg]
[demime 1.01d removed an attachment of type image/gif which had a name of
cat_side_en.gif]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|