butter up the inside of the pipe with Permatex hi-heat exhaust silicone -and
put it together when 1/2 dry with the springs ?
Maybe allow it to set-up 24-48 hrs. before start-up ? ?
Ought to work ....
c heers to ya , ' Dirt Track Doug '
-2225 miles due east of the Bonneville Salt Flats
but never more than a few feet from a cold one
-'point man' in the perpetual search for Hot Blues,
Cold Beer, Fast Cars, an' Warm Willin'
Wimin'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>
> From: jdincau@qnet.com
> To: land-speed@autox.team.net
> Date: Sat, 5 Apr 2008 15:30:24 -0700
> Subject: [Land-speed] Two stroke exhaust connections
>
> Hi all,
> Has anyone out there had any experience building two stroke engine
> exhaust pipes? Specifically attaching the exhaust system to the cylinder
> barrel. The standard exhaust on the engine we are running uses a ball and
> socket joint held together by springs at the barrel. We would like to run a
> more gas tight joint but are worried about stress on the barrel. Any
> comments?
> Jim in Palmdale
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as boogiewoogie12@hotmail.com
>
> http://autox.team.net/mailman/listinfo/land-speed
_________________________________________________________________
More immediate than e-mail? Get instant access with Windows Live Messenger.
http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_
instantaccess_042008
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|