land-speed
[Top] [All Lists]

Re: [Land-speed] Drilling teeny holes...

To: <drmayf@mayfco.com>, "LSR" <land-speed@autox.team.net>
Subject: Re: [Land-speed] Drilling teeny holes...
From: "Benn" <karhu@california.com>
Date: Mon, 24 Sep 2007 18:36:51 -0700
I'm no machinist (hey, Rich, how about some help here?), but I would think you
want pretty high speed for small bits.  But I could be full of shit.
Definitely want the "right" lube, I'd think.  And this completes my
know-nothing dissertation on the subject.
Benn
  ----- Original Message -----
  From: drmayf
  To: LSR
  Sent: Monday, September 24, 2007 5:24 PM
  Subject: [Land-speed] Drilling teeny holes...


  Other than very carefully, how does one go about drilling very small
  holes, holes on the order of 0.020 - 0.040 diameter? How do you chuck
  something that small? And I suspect that sharpening drills that small is
  not gonna happen. Can hardly see drill bits that small..

  I would be drilling in aluminum.

  mayf
  _______________________________________________
  karhu@california.com

  Land-speed mailing list

  http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________

Land-speed mailing list

http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>