Page 46 stats a minimum of 44" or tread width. My personal roadster has the
top center of the king pin at 41" and my tread width is 50". My rear tread
is 50" also. Tracking is important. Try negitive off set wheels if you want
to move yours in. Cheaper than an axle..I do not consider mine close to the
body...Good luck
Subject: [Land-speed] Front axle
> Glen and JD,
> What I was trying to find out if there are any
> advantages going to a narrower front axle.It seems that some of the
> roadsters have the wheels in a closer to the body then mine. This was my
> first year running at Bonneville and the learning experience was truly
> unbelievable.
> About 6 years ago when I started building my roadster
> for Bonneville,I had a front axle built by Specialty Cars in Calif..It
> was
> built out of 2 inch DOM and 44" wide at the bosses.After calling them to
> ask about a new shorter axle,it seems they are no longer in business.After
> a few calls today there seems no one wants to build a tube axle at the
> length I want.So I guess I will have to build my own.
> After leaving So Cal 2 years ago and now living in NW
> Arkansas, still trying to make some new connections.
>
> THANKS STEVE
> _______________________________________________
> gmc6power@earthlink.net
>
> Land-speed mailing list
>
> http://autox.team.net/mailman/listinfo/land-speed
_______________________________________________
Land-speed mailing list
http://autox.team.net/mailman/listinfo/land-speed
|